SYSMEX SF-3000 User Manual

INSTALLATION, Reagent Container Preparation
B-24 Sysmex SF-3000 Operator's Manual -- Revised September 1995
2. Assemble Cubitainer Spout Kit No.1
(1) Rinse the assembled silicone tube
and weight in the reagent from the
container. This is to prevent the
tube and weight from contaminating
the reagent cube.
(2) Insert the Cubitainer Spout Kit into
the container and screw down the
cap. Keep the container cap in a
safe place for future reuse.
Spout Kit No.1
Figure B-34: Assemble Cubitainer Spout
Kit No. 1
CAUTION: Verify that the Cubitainer Spout Kit No.1 stands vertically in the
Cubitainer.

SYSMEX SF-3000 Specifications

General

Brand	SYSMEX
Model	SF-3000
Category	Measuring Instruments
Language	English