SYSMEX SF-3000 - Page 596

ii Sysmex SF-3000 Operator's Manual -- Revised July 1996
Belt No. 6, Replace 5-67
Biohazardous Material, Hazardous and 1-6
Block Diagram
Electronic System 10-17
Sample Flow 10-4
Blood Asp Sensor Error,
Troubleshooting 8-21
Blood (Aspiration) Sensor
Location 10-25
Set 11-54
Blood Volume Sensor 10-36
Bottom Same Day, Search, Stored Data 4-40
Bottom, Search Stored Data 4-38
By Date
Search, Stored Data 4-41
Select Display 4-29
By Flagging, Select Display 4-27
[C]
Cable Connections B-29
Calculate Compensation Factor,
Calibration 7-15
Calibration
HGB/HCT Auto 7-3
HGB/HCT Manual 7-15
Mode-to-Mode, at Installation B-34
Calibration History 6-40
Delete 7-19
Display 7-18
Output 7-20
Calibration Implementation Standards 7-1
Calibration Samples 7-2
Calibration Value, Update 7-12
Cancel Output, Stored Data 4-53
Capillary Mode
Procedures 2-23
Sample Volume 2-23
Carryover 1-24
CBC8 Screen (P2), Stored Data 4-13
Cell Distribution 10-11
Chamber Errors, Troubleshooting 8-15
Chambers Location 8-16, 10-26
Character Structure, Serial Interface C-2
Check Digit C-20
Set 11-52
Check
Equipment 2-3
Pressure Gauge 2-6
Printer Paper 2-3
Reagent 2-3
Sampler 2-3
Waste Fluid 2-3
Check List
Maintenance 5-3
Unpacking B-2
Check Sum Error, Troubleshooting 8-45
Class A, Serial Interface C-5
Class B, Serial Interface C-5
Clean
Detector Chamber and Manometer 5-4
Manual Rinse Mechanism 5-29
Orifice 5-14
RBC Detector Aperture 5-38
RBC Transducer Sequence 5-33
SRV 5-21
SRV Tray 5-7
Waste Chamber 5-16
WBC Detector 5-9
Clean the Orifice, Guide 8-57
Clean the SRV, Guide 8-57
Clean the Waste Chamber, Guide 8-57
Clean the WBC Detector, Guide 8-58
Clean Waste Chamber Sequence 5-16
Clean WBC Detector Sequence 5-9
Clog Removal Sequence, RBC Aperture 5-31
Close RBC Detector Cover,
Troubleshooting 8-37
Close WBC Detector Cover,
Troubleshooting 8-37
Closed Mode
Procedures 2-37
QC Analysis 2-13
Sample Volume 2-37
Communication Format, Serial Interface C-2
Compensation Factor, Calculate,
Calibration 7-15
Compressor 10-34
Connect
Cables/Cords B-29
Reagent Lines B-26
Connectors 10-20
Control Chart Definition 6-53
<Control Expired>, Troubleshooting 8-55
Control Limit Error
Definitions 6-32
Troubleshooting 8-54
Control Table Error, Troubleshooting 8-46
Cord Connections B-29
Count 4-2, 4-20
Counter, Service Data 8-89
Reset 5-69
CP Indicator 1-12
Criteria, Abnormal IP Messages
PLT 11-31
RBC 11-29
WBC 11-28
Critical Limits, Set 11-18
Cubitainer Spout Kit CS-61, Preparation B-25
Cubitainer Spout Kit No. 1, Preparation B-24
Current Data, Stored Data
Delete 4-59
Output 4-51
Current Data, Work List, Delete 3-12