SYSMEX SF-3000 - Page 601

Sysmex SF-3000 Operator's Manual -- Revised September 1995 vii
QC Chart 6-31
Mean/SD 6-36
Output 6-34
QC Data Format C-12
QC Data, Select Display 4-33
QC Errors, Troubleshooting 8-55
QC File
Delete 6-3
Select 6-33
QC Method, Types of 6-2
QC Methods and Applications 6-47
QC Parameters to be Monitored 6-2
QC Parameters
X
/L-J 6-7
X
M 6-8
QC Plot, Delete 6-38
QC, System Settings 6-5
[R]
Rack Bar Code Label 2-30
Rack Feed In Function Error,
Troubleshooting 8-26
Rack Feed In Home Pos. Error,
Troubleshooting 8-26
Rack Feed In, Test 8-71
Rack Feed Out Function Error,
Troubleshooting 8-31
Rack Feed Out Home Pos. Error,
Troubleshooting 8-31
Rack Feed Out, Test 8-72
Rack Full Error, Troubleshooting 8-34
Rack ID Read Error, Troubleshooting 8-48
Rack Move Error 2, Troubleshooting 8-30
Rack Move Error 3, Troubleshooting 8-30
Rack Not Exist, Troubleshooting 8-34
Rack Removed, Troubleshooting 8-29
Rack Shift Function Error,
Troubleshooting 8-27
Rack Shift Home Pos. Error,
Troubleshooting 8-28
Rack Shift, Test 8-71
RAM Error, Troubleshooting 8-47
RBC Aperture Clog Removal Sequence 5-31
RBC CCSD Noise Error,
Troubleshooting 8-41
RBC Count Too Long, Troubleshooting 8-36
RBC Count Too Short, Troubleshooting 8-37
RBC Detector Aperture, Clean 5-38
RBC Detector Temp High,
Troubleshooting 8-11
RBC Detector Temp Low,
Troubleshooting 8-11
RBC Fast To Start, Troubleshooting 8-37
RBC Flag, Set 11-29
RBC Histogram 10-15
RBC Indices 10-7
RBC IP Message
Abnormal Limits, Set 11-29
Criteria 4-6
Criteria, Abnormal IP Messages 11-29
List 4-6
RBC Particle Size Distribution 10-12
RBC Sampling Error, Troubleshooting 8-40
RBC Slow To Start, Troubleshooting 8-36
RBC Transducer, Clean Sequence 5-33
RBC/PLT Analysis Flow 10-5
RBC/PLT Sampling Data, Service Data 8-88
RBC/PLT Screen (P5), Stored Data 4-16
RBC/PLT Service Data 8-87
RBC/PLT/HGB Analysis, Sample Flow 10-4
RDW-CV 10-12
RDW-SD 10-12
React Chamber Thermal Sensor Discon.,
Troubleshooting 8-13
Reaction Chamber Mixing Motor, Test 8-68
Reaction Chamber Temp High,
Troubleshooting 8-12
Reaction Unit 10-25
Reaction Chamber Temp Low,
Troubleshooting 8-12
Read FD Data, Select Display 4-35
Read FD, Target/Limit, QC 6-15
Ready LED 10-19
Reagent
Connections B-26
Consumption 2-3
Information 10-39
Operator Check 2-3
Replace 5-46
Safety 1-6
System 10-38
Types 1-21
Reagent Container Preparation B-23
Reagent Indication Mark B-23, 25
Reagent Log 5-50
Update 5-47
Reagent Ports 10-21
Rear Panel, Remove Packing Material B-10
Rear, Main Unit 10-20
Recover, Excluded Calibration Data 7-11
Reference Data, QC, Target/Limit, Set 6-37
Reference Values, Calibration 7-2
Enter 7-6
Relative Height Representation Method 10-14
Relocation Information 1-19
Remove Fluid from PU Trap Chamber 5-6