SYSMEX SF-3000 User Manual

SAMPLE PROCESSING, Manual Closed Mode Procedures
2-38 Sysmex SF-3000 Operator's Manual -- Revised September 1995
CAUTION: • If VENOJECT® II collection tubes are to be used, contact a
Sysmex service representative for assistance.
• Recapped VENOJECT® II collection tube cannot be used. While
inverting or piercing such a collection tube, the cap may be
removed.
2 . Select Closed Mode
If "Closed Mode" does not appear on the LCD display, follow the procedure below to
select closed mode.
(1) Press the Next No. keypad in the top line of the LCD. The Sample No. Setting
screen will appear.
(2) The selected analysis mode is backlit in light-blue. Press [Closed Mode] to select
Closed mode.
The messages "Not Ready" and "Mode Change" appear in the top line of the LCD.
After the system condition becomes ready for analysis, "Ready" and "Closed
Mode" will be displayed.
Sysmex
DP:1234567890123
XM HC GP DP SU
Ready
Closed Mode Next No.1234567890123
Sampler
Closed Sample Number
CANCEL
ENTER
C
3
9
6
0
1
7
4
2
8
5
Ð
Q C
1234567890123
Analysis Mode
Manual Mode
Capillary Mode
Closed Mode
Figure 2-29: Sample No. Setting Screen (Closed Mode)

SYSMEX SF-3000 Specifications

General

Brand	SYSMEX
Model	SF-3000
Category	Measuring Instruments
Language	English