Tecnam P2002 JF - Page 1269

2
nd
Edition - Rev 0
SUPPLEMENT SG-1
CHAPTER 34 - NAVIGATION
Page 38
Airspeeds setting
Set up the Airspeed markings accordingly to your a/c model (retractable or fixed
gear) referring to the below table.
The below airspeeds are reported in KIAS (Knots of indicated airspeed).
JF JR
V
s0
31 32
V
s1
41 46
V
fe
68 68
V
no
11
2
11
3
V
ne
14
1
14
4
V
glide
69 68
V
r
46 35
V
x
61 61
V
y
66 66
Follow the below instructions to set up the airspeed markings.
Step
no.
Airspeed Markings setup
Additional info
&References
1.
Master OFF
2. GDU breaker: pull
Optionally, the
technician may remove
power from the stand-
by instruments by
pulling the circuit
breakers
3.
GRS breaker: pull
4.
GDC breaker: pull
5.
Insert the correct Installer Unlock Card (010-00769-
60) into the GDU620 bottom card slot
6. Make sure that GDU620 breaker is pulled
Optionally, the
technician may remove
power from the stand-
by instruments by
pulling the circuit
breakers