Tecnam P2002 JF - A List of Applicable Cmms Is Herein Reported; Engine Inspections; Propeller Inspections; Vendor Equipment Inspections

2
nd
Edition - Rev 0
Page 4
05-20
INSPECTION PROGRAM
1. Engine inspections
Refer to Rotax Engine Maintenance Manual P/N 899191 -last issue - for engine
inspections and maintenance with related schedule. Consult also applicable ser-
vice bulletins and instruction books regarding the repair and overhaul, inspection
and installation of engines.
2. Propeller inspections
Refer to Hoffman Propellers Operation and Installation Manual N° E540A - last
issue - for propeller inspections and maintenance with related schedule.
3. Vendor equipment inspections
For vendor equipment installed (e.g. ELT system), make always reference to ap-
plicable maintenance instructions addressed on related Component Maintenance
Manuals (CMM). Inobservance of this recommendation may affect the aircraft
airworthiness.
A list of applicable CMMs is herein reported:
Doc. No
Description
570-1600
Description, operation, installation and maintenance manual ME406 ELT – Last issue
08038F rev.05
ELT Kannad : Installation and Operation Manual
190-00357-05
GNS 500W SERIES MAINTENANCE MANUAL GPS 500W and GNS
530W/530AW/TAWS - – Last issue
190-01182-01
GNC 255A Pilot’s Guide
190-01007-03
Garmin GTN650 Pilot Guide
190-01182-00
Garmin GTR 225/225A/225B Pilot’s guide
190-00149-02
GARMIN GMA340 AUDIO PANEL Maintenance manual – Last issue
190-00149-10
GARMIN GMA340 AUDIO PANEL Pilot’s Guide
560-0404-03a
GARMIN APOLLO MODEL SL 30 NAV/COMM INSTALLATION MANUAL –
Last issue
190-00420-05
GARMIN GTX 328 TRANSPONDER Maintenance manual - Last issue
G02819226
Gill Battery log Book