Page 1 2
nd
Edition – Rev 0
78-10
EXHAUST – DESCRIPTION AND OPERTION
78-10 EXHAUST
DESCRIPTION AND OPERATION
Exhaust manifolds (1) are flanged to the engine and join the muffler separately (2).
The muffler also works as a heat exchanger (3) for carb. and cabin heat.
The exhaust system must always be checked for possible cracks (ref. Periodic
Inspection Table on chapter 5). Close attention must be given to the heat exchanger
system which should be totally disassembled for inspection as cracks would allow
noxious fumes to be mixed with carb and cabin air heat.
.
Figure 1. – Exhaust system
To Next Page
Loading...
