Page 202 2
nd
Edition – Rev 0
25-20
SAFETY BELTS – MAINTENANCE PRACTICES
3. SAFETY BELT CLEALING PROCEDURE
The restraint system cleaning, removing dirt and unwanted oil and grease, helps the system
itself to last longer and prevents corrosion of the metal parts.
The webbing can be cleaned with fresh water and a mild soap (machine washing not allowed)
using a sponge or a soft brush. Do not use water or soap on metal parts: these can be protected
by pieces of cloth during webbing cleaning.
The metal fittings are cleaned with a cloth moistened with isopropyl alcohol.
To Next Page
Loading...
