Page 201 2
nd
Edition – Rev 0
10-20
STORAGE AND RETURN TO SERVICE
Restoration from storage
Procedure
1. Install the battery (see Chapter 12, battery installation procedure).
2. Check the wheels pressure.
3. Check oil and cooling system.
4. Reactivate ELT.
5. Remove chocks from wheels.
6. Engine: refer to Rotax Operator’s Manual P/N 899372 - Engine Back to Operation
Instructions.
7. Propeller: refer to Hoffman propeller Operation and Installation Manual –
Storage instructions.
8. Make an engine start test (see AFM, engine start procedure).
To Next Page
Loading...
