Tecnam P2002 JF - Engine Mount Installation; Pre-Installation Procedure

Page 202 2
nd
Edition - Rev 0
71-20
ENGINE MOUNT – MAINTENANCE PROCESSES
2. ENGINE MOUNT INSTALLATION
Pre-installation Procedure
Step
no.
Engine pre-installation procedure
Task description
Additional info &
References
1.
Examine that engine mount and engine attach-
ment points are free from damages, corrosion,
deformations or cracks.
No deformation permitted.
No corrosion permitted.
No cracks permitted.
2.
Examine the main bolt assemblies. Look espe-
cially for corrosion and deformation. Replace
bolts if required
Hereinafter they are addressed instruction to install the engine assembly
Installation Procedure
Step
no.
Engine mount installation
Task description
Additional info &
References
1.
Engage parking brake
2.
Align engine mount attachment holes with fire-
wall holes
3.
Insert bolt washers and nuts
4.
Upper attachments:
 Bolt: AN4-16 (2x)
 Washer:AN960-416 L (4x)
 Self-locking nut: MS21042-4 (2x)
Refer to Figure 7.