Tecnam P2002 JF - Exhaust Installation

Page 202 2
nd
Edition – Rev 0
78-10
EXHAUST – MAINTENACE PRACTICES
2. EXHAUST INSTALLATION
Tools
Item
Quantity
Part Number / Notes
Copper lubricant
A/R
Commercial
Sealant
A/R
TYPE3 (High temperature sealant)
Pre-installation Procedure
Step
no.
Task description
Additional info &
References
1.
Examine that exhaust manifold are free from
corrosion or deformations
No deformation permitted.
No corrosion permitted.
2.
Examine the main bolt assemblies. Look
especially for corrosion and deformation.
Replace bolts if required
Refer to Figure 3A.