Tecnam P2002 JF - Maintenance Practices; Safety Belt Removal Procedure

Page 200 2
nd
Edition – Rev 0
25-20
SAFETY BELTS – MAINTENANCE PRACTICES
MAINTENANCE PRACTICES
This Chapter contains the following maintenance tasks description:
Safety belt removal procedure
Safety belt inspection procedure
Safety belt cleaning procedure
1. SAFETY BELT REMOVAL PROCEDURE
Secure belt removal procedure
Step
Task description
Refer to:
1.
For a suitable work area, apply remove seats
Chapter 12
2.
Unscrew and remove upper safety belts
attachments (LH/RH)
Fig. 5
3.
Unscrew and remove lower safety belts
attachments (LH/RH)
Fig. 4
4.
Pull out safety belts from its location
5.
For reassembly safety belts, reverse these steps.