Tecnam P2002 JF - MLG Removal

Page 201 2
nd
Edition – Rev 0
32-10
MLG and BRAKES – MAINTENANCE PRACTICES
1. MLG REMOVAL
Hereinafter they are addressed instruction to remove the legs main gear.
Main gear assy removal can be performed also with the wheel installed: as option, you
can remove the wheel before.
Procedure
Step no.
Task description
Additional info &
References
∙
The following instruction are valid for the removal of both legs.
1.
Make sure Master Switches is turned OFF.
2.
Lift the airplane on jacks until the wheels are clear
of the ground
Refer to Figure 2.
Refer to Chapter 06-00
WARNING
INSURE AIRCRAFT IS SECURE AND STABLE BEFORE BEGINNING ANY
WORK. WORKING UNDER AN IMPROPERLY STABILIZED
AIRCRAFT COULD CAUSE INJURY OR DEATH.
3.
Remove following cover:
- LWR CENTRAL WING TO FUSELAGE
FAIRING
- CAP n° 6
Refer to IPC
Refer to Figure 3.
Refer to Chapter 06-00
4.
Remove flexible brake fluid line from the wheel
Refer to Figure 4, plug the
hose to protect from
contamination
WARNING
PAY ATTENTION TO THE LEAKAGE OF OIL FROM THE BREAK FLUID LINE.
COLLECT THE OIL INTO A CONTAINER
5.
Unscrew the three connection nuts one by one
Refer to Figure 5.
6.
Remove the leg from fuselage