Tecnam P2002 JF - Stiff Riveted Placard Installation; Stiff Riveted Placard Removal

Page 201 2
nd
Edition – Rev 0
11-30
INTERNAL PLACARDS – MAINTENANCE PRACTICES
Stiff Riveted Placard Removal
Tools
Item
Quantity
Part Number / Notes
Drill
1
Commercial type
Drill bit #3.25 mm
1
Commercial type
Procedure
The rivets must be removed utilizing a #3.25 mm drill bit with an appropriate drill stop;
carefully drill the rivet head with light pressure: heavy pressure can cause deformation of the
substructure.
Stiff Riveted Placard Installation
Tools
Item
Quantity
Part Number / Notes
Riveter
1
Commercial type
Rivet
a/r
AVDEL Avex 01663-00410
Procedure
Place in position the placard and fix the required rivets in the holes.