Tecnam P2002 JF - Radiator Replacement

Page 202 2
nd
Edition - Rev 0
75-10
LIQUID COOLING SYSTEM – MAINTENANCE PRACTICES
2. RADIATOR REPLACEMENT
Procedure
Step
no.
Task description
Additional info &
References
CAUTION
ENSURE THAT ENGINE IS OFF AND COOL BEFORE OPERATING
MAINTENANCE ON THE RADIATOR.
1.
Engage parking brake
2.
Set MASTER switch OFF
3.
Remove engine cowlings
Ref.: Chapter 06
4.
Unscrew serflex and remove hoses connected to
the radiator
Note connections. Refer to
Figure 8.
5.
Unscrew bolts that fix the radiator to its support
Hold firmly the radiator by
hand during removal.
Refer to Figure 9.
6.
Clear the radiator of support; replace it if needed.
7.
Place into position the new/overhauled unit
Align radiator’s lower holes
with support’s ones.
8.
Fix the unit to the support by bolts
Hold firmly the radiator by
hand during installation.
9.
Restore connections removed at step 4.
Fasten hoses by serflex.
10.
Install engine cowlings