Page 1 2
nd
Edition - Rev 0
71-10
ENGINE COWLINGS – DESCRIPTION AND OPERATION
71-10 ENGINE COWLINGS
DESCRIPTION AND OPERATION
The engine cowling is a gull wing type. The cowling is made up of two parts: the upper
part consists of a fiberglass nose and light alloy panels while the bottom part is partially
made of fiberglass and aluminum.
Cowling top is easily removed by releasing four latches, two on each side.
Removal of lower portion is just as easy by quick release of two side pins and two
latches located on bottom.
Air circulation is provided by front openings in nose section and by an outflow area on
the underside by the firewall.
To Next Page
Loading...
