Tecnam P2002 JF - Exhaust Removal

Page 201 2
nd
Edition – Rev 0
78-10
EXHAUST – MAINTENACE PRACTICES
1. EXHAUST REMOVAL
Step
no.
Task description
Additional info &
References
1.
Engage parking brake
2.
Ensure that Master Switch is turned OFF
3.
Remove engine upper and lower cowling panel
See Chapter 54
CAUTION
ENSURE THAT ENGINE IS COOL BEFORE STARTING ANY
OPERATION
4.
Loosen serflex and remove air system hoses
from heat exchanger
Refer to Figure 3.
5.
Remove spring from exhaust manifold
Refer to Figure 3
6.
Unscrew nut to disconnect exhaust manifold
Refer to Figure 3A
7.
Remove muffler