Tecnam P2002 JF - Annunciator Panel Lights Replacement

Page 202 2
nd
Edition – Rev 0
33-10
INTERNAL LIGHTS – MAINTENANCE PRACTICE
3. ANNUNCIATOR PANEL LIGHTS REPLACEMENT
Step
no.
Task description
Additional info &
References
1.
Make sure Master Switches are turned off
2.
Unfasten the pertinent LH or RH over-hear panel
3.
Disengage electrical connector and remove panel
4.
Cut the mastic to release the light
5.
Put in position a new light
Engage the connector and test the
light before fixing with mastic
6.
Fix the light with a new binding of mastic
7.
Engage the electrical connector
8.
Install the over-head panel
9.
Perform a functional test
4. LED LIGHT REPLACEMENT
Step
no.
Task description
Additional info &
References
1.
Make sure Master Switches are turned off
2.
Disassemble the dome light box
3.
Unscrew the dome light protection
4.
Replace the dome light
5.
Screw the dome light protection
6.
Assemble the dome light box
7.
Perform a functional test