Page 1 2
nd
Edition - Rev 0
RECORD OF REVISIONS
A Record of Revisions to this Manual is provided and the Tecnam maintenance operators are
advised to make sure that the record is kept up-to-date.
The Manual issue is identified by Edition and Revision codes reported on each page, lower right
side. The revision code is numerical and consists of the number "0"; subsequent revisions are
identified by the change of the code from "0" to "1" for the first revision to the basic publication,
"2" for the second one, etc.
Should be necessary to completely reissue a publication for contents and format changes, the
Edition code will change to the next number (“2” for the second edition, “3” for the third edition
etc).
Additions, deletions and revisions to existing text will be identified by a revision bar (black line) in
the left-hand margin of the page, adjacent to the change.
When technical changes cause expansion or deletion of text which results in un-changed text
appearing on a different page, a revision bar will be placed in the right-hand margin adjacent to the
page number of all affected pages providing no other revision bar appears on the page.
These pages will be updated to the current regular revision date.
When a new issue of the Maintenance Manual is released, operators will be advised by a dedicated
Service Bulletin for Information. Then it will be uploaded on the website www.tecnam.com where
the operators, once registered, can have access for downloading.
IMPORTANT
All technical documentation is available on customer service area of website
www.tecnam.com. Please fill in and send us the registration form with you general
information, you will receive an information mail to activate your username and password.
For any problems, please contact airworthiness@tecnam.com
NOTE: It is the responsibility of the owner to maintain this handbook in a current status when it is
being used for operational purposes.
To Next Page
Loading...
