Tecnam P2002 JF - Page 374

Page 205 2
nd
Edition – Rev 0
25-10
CABIN INTERIORS – MAINTENANCE PRACTICES’
Panel LH3
Step
Task description
Refer to:
1.
Apply Panel LH2 removal procedure
Tab. 4
2.
Unscrew panel fittings (Type B)
3.
Pull out LH3 panel from its location
4.
For reassembly panel, reverse these
steps.
Panel RH1 RH2 RH3
Step
Task description
Refer to:
1.
For RH1 removal procedure apply same task of LH1 panel
Tab. 3
2.
For RH2 removal procedure apply same task of LH2 panel
Tab. 4
3.
For RH3 removal procedure apply same task of LH3 panel
Tab. 5