Tecnam P2002 JF - Page 881

79-10
OIL SYSTEM – MAINTENANCE AND PRACTICES
2
nd
Edition - Rev 0
Page 204
Step
no.
Task description
Additional info &
References
6.
Clear the oil cooler of support; replace it if needed.
Hold firmly the cooler by
hand during removal.
7.
Place into position the new/overhauled unit
Align cooler’s holes with
support’s ones.
Ref.: Figure 8
8.
Place into position hoses and screw them and cool-
er to support
Hold firmly the cooler by
hand during installation.
Restore connections re-
moved at step 5.
9.
Install engine cowlings