SUPPLEMENT S2
RECORD OF REVISIONS
SUPPLEMENT S2
RECORD OF REVISIONS
In order to improve the aircraft safe and efficient operation, Tecnam, whenever
considered necessary, will amend, add or delete information and instructions within
the Supplement.
A Record of Revisions to this Supplement is then provided and the operator is
advised to make sure that the record is kept up-to-date.
The Supplement issue is identified by Edition and Revision codes reported on each
page, lower right side. The revision code is numerical and consists of the number "0";
subsequent revisions are identified by the change of the code from "0" to "1" for the
first revision to the basic publication, "2" for the second one, etc.
Should be necessary to completely reissue a publication for contents and format
changes, the Edition code will change to the next number (“2” for the second edition,
“3” for the third edition etc).
Additions, deletions and revisions to existing text will be identified by a revision bar
(black line) in the left-hand margin of the page, adjacent to the change.
When technical changes cause expansion or deletion of text which results in
unchanged text appearing on a different page, a revision bar will be placed in the
right-hand margin adjacent to the page number of all affected pages providing no
other revision bar appears on the page.
These pages will be updated to the current regular revision date.
NOTE: It is the responsibility of the owner to maintain this supplement in a current
status when it is being used for operational purposes.
To Next Page
Loading...
