TEEJET 5000 OPERATORS MANUAL FERTILISER DISTRIBUTOR, BREDAL
4.45
FORWARD SPEED SENSOR
A speed sensor is fitted to the spreader, this sensor gives the correct number of
pulses for controlling the application rate, and this sensor should be selected.
If forward speed measurement is not required from the sensor mounted on the
spreader, WHEEL TRACTOR or RADAR can be selected.
Please refer to chapter 2 for forward speed sensor calibration
IMPLEMENT SENSOR
Using 1 of the following 3 options, select how the area counter is to be switched on
and off:
LIFT
FERTILISER DISTRIBUTOR
PTO
The selected sensor is shown at the top of the display.
METRE SWITCH
Select whether the metre counter is started/stopped manually “MANUAL” or by
the selected implement sensor “IMPLEM. SENSOR”.
WORK HOUR ON/OFF
Select whether the timer function is started/stopped manually via the function key
in the operation menu or by the selected implement sensor.
To Next Page
Loading...