BALER TEEJET 5000 OPERATORS MANUAL
6.2
BALER
Select baler from the main menu as follows:
Move the cursor using the arrow keys to “BALER”
when this is done press “SELECT”.
The following is displayed:
It is now possible to select between the following
functions:
OPERATION
ENCODE
DATA/DELETE
TASK OPERATION.
TASK OPERATION is described in General Functions
(section 2) together with the functions that are available
in all of the programs (area, time & tractor functions) all
of the other functions will be described one by one.
To Next Page
Loading...