SLURRY SPREADER, HORSCH TEEJET 5000 OPERATORS MANUAL
7.28
SLURRY SPREADER (HORSCH)
Select slurry spreader from the main menu
as follows:
1. Using the arrow keys move the cursor
over “SLURRY SPREADER”. Press
“SELECT”.
2. Main menu
- select slurry spreader
3. Accept the selected type or choose
another type.
4. Select type
5. It is now possible to choose between
the displayed types.
6. Select the slurry spreader type.
7. Accept
It is now possible to select between the
following functions:
OPERATION
ENCODE
DATA/DELETE
TASK OPERATION.
TASK OPERATION is described in
General Functions (section 2) together with
the functions that are available in all of the
programs (area, time & tractor functions)
all of the other functions will be described
one by one.
To Next Page
Loading...