FERTILISER DISTRIBUTOR, REI
β
l TEEJET 5000 OPERATORS MANUAL
4.134
WARNING ENCODE
The following warnings can be set in this menu:
It is recommended to turn all warnings, which are not wanted “OFF”.
PTO: Warning ON/OFF and MAX/MIN-limits for revolutions.
KM/H: Warning ON/OFF and MAX/MIN-limits for speed.
SLIP: Warning ON/OFF and MAX/MIN-limits for wheel slip in %.
MIS-
DOSERATE: Warning ON/OFF and MAX difference in +/-%
TON
LEFT: Warning ON/OFF and amount of ton (min.) at which warning is
wanted.
RPM 1: Warning ON/OFF and MAX/MIN-limits for shaft speed. Encode in
RPM.
NB: The encoded limits must exceed the limits encoded. If a warning is
required when an axle stops (0 RPM) then set the minimum limit to 1.
DATE – CLOCK
Set the date and time in this menu:
HOURS – MINUTES – YEAR – MONTH – DAY.
To Next Page
Loading...