DGPS TEEJET 5000 OPERATORS MANUAL
9.2
INTRODUCTION
TeeJet 5000 with DGPS functions
Task function that controls the application rate for various implements
depending on an application map made via a PC.
Field boundary measurement plus island measurement, which can be
transferred to a PC.
Soil sampling with the position of each individual sample point.
Data Logging, (recording) of what has actually happened in the field.
Job computer. The TeeJet 5000 DGPS version can be used as a job computer
in connection with another computer. (switch DGPS to “OFF” as described on
the following page. The TeeJet 5000 will control the implement when
application set points are received from the other computer via the serial
connection.)
For further information regarding data transfer and mapping in general, please
consult the user manual for the PC software used.
Note! The TeeJet 5000 must be connected to a TeeJet DGPS module and a
TeeJet DataLink module plus be a DGPS version before the computer
can work with the available DGPS functions.
To Next Page
Loading...