FERTILISER DISTRIBUTOR, BREDAL HYDR. B TEEJET 5000 OPERATORS MANUAL
4.50
FERTILISER SPREADER OPERATION
FORWARD SPEED (KG/MIN):
The primary function under fertiliser distributor is
forward speed.
Forward speed is displayed in KPH with 1 decimal.
Forward speed is calculated from the signal from the
speed sensor selected in encode (wheel tractor, wheel
sprayer or radar).
KG/MIN is displayed if “MAN” has been selected under
“AUTO/MAN” in encode.
AREA MEASUREMENT:
The worked area is displayed in Ha. Area is displayed
with 2 decimals from 0 to 99.99 ha. And thereafter with
1 decimal from 100 to 999.0 ha.
NOTE: a total counter for area can also be found in
“DATA/DELETE”.
FERTILISER SPREADER-FUNCTIONS:
KG/HA (RPM 1): Application rate in KG/HA. (The shaft
speed from sensor fitted to the
spreader if “MAN” has been selected
under encode)
KG: Fertiliser consumption in kg.
KG LEFT: Kg remaining in the hopper (the
amount must be encoded before
starting).
+XX%: Step dosage, increase.
-XX%: Step dosage, decrease.
DOSE RATE
NORMAL: Encoding the required application rate
or return to normal after using the step
key.
To Next Page
Loading...