SEED DRILL, SIMBA TEEJET 5000 OPERATORS MANUAL
5.64
FAN: Revolutions per minute for the fan.
(if “2 FANS OFF” is selected. See page 5.70)
FAN 1:
FAN 2: Revolutions per minute for both fans.
(if “2 FANS ON” is selected. See page 5.70)
1/2 WIDTH:
1/1 WIDTH: reduces the drill width by one half of the encoded. When 1/2
WIDTH is selected, the function of the key changes to 1/1 WIDTH
and the drill width is returned to the encoded working width by
pressing this key.
Pressing the “NEXT PAGE” key displays the first available functions.
HOLD KEY
Press this key if the present bout is not required in the
selected rhythm. This function “holds” the present
status regardless of how many times the drill is raised.
When this function is activated, “HOLD” flashes on the
display.
TRAMLINE INDICATOR
No tramlines are made.
Tramlines are made.
FORWARD SPEED
The forward speed is displayed in kilometres per hour with 1 decimal. The forward
speed is calculated from signals received from the sensor selected under
“ENCODE” (wheel tractor or radar).
To Next Page
Loading...