TEEJET 5000 OPERATORS MANUAL GENERAL FUNCTIONS
2.5
TIMER: Used for measuring the time spent at a certain job. The timer can
be stopped and started manually.
NB: the implement sensor does not control the timer.
END TIME: The time when the present job is expected to be finished
calculated on the present travelling efficiency and the encoded
remaining area.
CLOCK: Time shown in hours: minutes: seconds. Clock is set in
"ENCODE".
DATE: The date shown as day: month: year. Date is set in "ENCODE".
TASK FUNCTION
It is possible to record up to 50 individual tasks in the version 4 TeeJet 5000; these
50 tasks are independent of each other and can be shared between all of the
different implements.
If the task feature is not required, it is possible use the trip & total counters to
record data in the version 4 TeeJet 5000.
If the “Task Feature” is required, then a task number must be selected
before work commences. All trip counters (area, time and quantity) will be
reset automatically when a new task number is selected.
The main functions in the “Task Feature” are as follows:
Start task
Stop task
See task
Delete task
The following is also possible if you possess the correct accessories:
Print task,
Necessary accessories: TeeJet mobile printer incl. cable TeeJet no. 905-242
connected to the System A plug on the TeeJet 5000.
If the System A socket is used by other equipment use connecting cable TeeJet
no. 197-130.
Data transfer to a PC via the RS232 output,
Necessary accessories: Power supply and serial cable.
A PC with Windows 3.xx or Windows 95 is necessary to transfer data to a PC via
serial cable.
To Next Page
Loading...