FERTILISER DISTRIBUTOR, OTHER TYPE TEEJET 5000 OPERATORS MANUAL
4.12
WARNING ENCODE
The following warnings can be set in this menu:
It is recommended to turn all warnings, which are not wanted “OFF”.
PTO: Warning ON/OFF and MAX/MIN-limits for revolutions.
KM/H: Warning ON/OFF and MAX/MIN-limits for speed.
SLIP: Warning ON/OFF and MAX/MIN-limits for wheel slip in %.
KG
LEFT: Warning ON/OFF and amount of kg (min.) at which warning is
wanted (this warning is only available if PULSE WEIGHING has
been selected).
RPM 1: Warning ON/OFF and MAX/MIN-limits for shaft speed. Encode in
RPM.
RPM 2: Warning ON/OFF and MAX/MIN-limits for shaft speed. Encode in
RPM (only available if RPM has been selected).
NB: The encoded limits must exceed the limits encoded. If a warning is
required when an axle stops (0 RPM) then set the minimum limit to 1
DATE - CLOCK:
Set the date and time in this menu:
HOURS - MINUTES - YEAR - MONTH - DAY.
To Next Page
Loading...