SLURRY SPREADER, OTHER TYPE (HYDR.) TEEJET 5000 OPERATORS MANUAL
7.26
WARNING ENCODE
The following warnings can be set in this menu:
It is recommended to turn all warnings, which are not wanted “OFF”.
PTO: Warning ON/OFF and MAX/MIN-limits for revolutions.
KM/H: Warning ON/OFF and MAX/MIN-limits for speed.
SLIP: Warning ON/OFF and MAX/MIN-limits for wheel slip in %.
MIS-
DOSERATE: Warning ON/OFF and max difference in %.
RPM
DISTRIBUTOR: Warning ON/OFF and MAX/MIN-limits for shaft speed. Encode in
RPM.
RPM PUMP: Warning ON/OFF and MAX/MIN-limits for shaft speed. Encode in
RPM.
NB: The encoded limits must exceed the limits encoded. If a
warning is required when an axle stops (0 RPM) then set
the minimum limit to 1
DATE - CLOCK:
Set the date and time in this menu:
HOURS - MINUTES - YEAR - MONTH - DAY.
To Next Page
Loading...