TEEJET 5000 OPERATORS MANUAL SEED DRILL, SIMBA
5.67
METHOD A EVEN
A rhythm of 4 is encoded
in this example. A single
clutch is fitted on the left-
hand side of the seed
drill.
NB!
Tramlines are made in
bout numbers 2 and 3
(split), when a rhythm of
4 is encoded.
Note where, in the first 4
bouts around the whole
field, the bouts should
be counted (A) and
where bouts should not
be counted (all other
corners). After each trip
around the field the
machine is turned
around, and is driven in
the opposite direction.
Bout counting can be
controlled by using either
the “HOLD” key or by
using the “TRACK +/-“
keys.
To Next Page
Loading...