TeeJet 5000 - 2 Manual Application Control

FERTILISER DISTRIBUTOR, RAUCH AERO TEEJET 5000 OPERATORS MANUAL
4.94
2. MANUAL APPLICATION CONTROL
HA: Area.
KG: Consumption in KG.
KG LEFT: How many KG are left in the hopper at
present.
HA: Area counter. Worked area since the last reset.
NOTE: Total area counter is found in “DATA/DELETE”.
KG: Total KG used, calculated from forward speed and gate position.
This function presupposes correct calibration.
NOTE: Total KG counter is found in “DATA/DELETE”.
KG REST: Total KG remaining in the hopper (the amount must be encoded
before start).
Pressing the “NEXT PAGE” key displays the next functions.
AUTO/MAN: Pressing this key changes between
automatic and manual application
control. During manual operation
“MAN” flashes at the bottom of the
display.
Pressing the “NEXT PAGE” key displays the first functions.
+: Higher application rate.
-: Lower application rate.
KG/HA: The present application rate.