FERTILISER DISTRIBUTOR, BREDAL HYDR. K TEEJET 5000 OPERATORS MANUAL
4.66
1. Press “TARRING” for approx. 3 seconds whilst at a
standstill, “WEIGHT” will change to 0, which is the
same as 0 KG.
There are 2 possibilities:
a) Start spreading with the weight displayed, and at each weighing the amount
left in the spreader can be seen.
b) Each time “TARRING” is pressed for approx. 3 seconds with something in the
spreader; the displayed KG will be 0. It is now possible to see how much has
been used (negative weighing). It is not possible to see how much fertiliser is
left in the spreader.
SPREADER ON/OFF:
This key is used as the on/off switch for the spreader.
It is also possible to start/stop the spreader using an
external switch.
This picture is displayed when spreading.
I
When the area override sensor is activated (not
counting area) “I” is displayed and all sections will
disappear.
To Next Page
Loading...