TEEJET 5000 OPERATORS MANUAL FERTILISER DISTRIBUTOR, OTHER TYPE
4.3
FERTILISER DISTRIBUTOR OPERATION (OTHER TYPE)
FORWARD SPEED:
The primary function under fertiliser distributor is
forward speed.
Forward speed is displayed in KPH with 1 decimal.
Forward speed is calculated from the signal from the
speed sensor selected in encode (wheel tractor, wheel
spreader or radar).
APPLICATION RATE IN KG/HA:
When “WEIGHING” or “PULSE WEIGHING is
selected, area measurement is displayed.
AREA MEASUREMENT:
The worked area is displayed in Ha. Area is displayed
with 2 decimals from 0 to 99.99 ha. And thereafter with
1 decimal from 100 to 999.0 ha.
NOTE: A total counter for area can also be found
in “DATA/DELETE”
FERTILISER DISTRIBUTOR FUNCTIONS:
Three different function sets can be displayed in this menu
The following can be selected in “ENCODE”:
WEIGHING
PULSE WEIGHING
RPM 2
The function sets for each possibility are described in the following:
1. WEIGHING. (DIRECT WEIGHING WITH WEIGH CELLS).
KG: Fertiliser consumption in KG.
TARRING: Tarring the weigh cell(s).
DRIVE START: Pressing this key stores the present
weight in the TeeJet 5000’s
memory.
RPM 1: Revolutions per minute.
To Next Page
Loading...