FERTILISER DISTRIBUTOR, OTHER TYPE TEEJET 5000 OPERATORS MANUAL
4.4
TARRING:
1. Press “TARRING” with an empty fertiliser
distributor, the displayed “KG” will change to 0.
2. Fill the spreader and the weight will be displayed
Using weighing:
There are 2 possibilities:
Start spreading with the weight displayed, and at each weighing the amount left in
the spreader can be seen.
Each time “TARRING” is pressed; the displayed KG will be 0. It is now possible to
see how much has been used (negative weighing). It is not possible to see how
much fertiliser is left in the spreader.
NOTE: The actual weight is stored in the memory when “DRIVE START” is
pressed. This value is used together with area measurement to
calculate KG/HA.
The accuracy of this calculation depends on the amount of fertiliser
spread since the last calculation, the larger the amount the better the
accuracy.
To Next Page
Loading...