SPRAYER TEEJET 5000 OPERATORS MANUAL
3.12
PRESSURE SENSOR
Encode the maximum working pressure for the fitted pressure sensor. This
maximum Pressure is normally printed on the pressure sensor. Zero setting the
pressure sensor (tarring) can be done under both “OPERATION” and “ENCODE”.
TANK VOLUME
Encode the sprayer’s tank volume when using the optional filling equipment.
METRE SWITCH
Select whether the metre counter is to be started and stopped manually
“MANUAL” or via the implement sensor “IMPLEM. SENSOR”.
SYSTEM B PLUG
There are 2 system plugs on the back of the TeeJet 5000.
The System A plug is compatible with older TeeJet 5000 versions.
The System B plug is for new connections.
ACTIVE 0 VOLT: Boom sections are opened with 0V.
ACTIVE 12 VOLT: Boom sections are opened with 12V.
ON/OFF: ON: The System B plug is used.
OFF: The System B plug is not used.
PTO SENSOR
Encode the number of pulses the PTO sensor sends per revolution (encode 1 if
the TeeJet PTO sensor kit is used).
WORK HOUR ON/OFF
Select whether the timer function is started/stopped manually via the function key
in the operation menu or by the selected implement sensor.
To Next Page
Loading...