TEEJET 5000 OPERATORS MANUAL FERTILISER DISTRIBUTOR, BREDAL HYDR. K
4.73
WARNING ENCODE
The following warnings can be set in this menu:
It is recommended to turn all warnings, which are not wanted “OFF”.
PTO: Warning ON/OFF and MAX/MIN-limits for revolutions.
KM/H: Warning ON/OFF and MAX/MIN-limits for speed.
SLIP: Warning ON/OFF and MAX/MIN-limits for wheel slip in %.
RPM 1: Warning ON/OFF and MAX/MIN-limits for revolutions. Encode as
RPM.
TON
LEFT: Warning ON/OFF and amount in tons (minimum) at which warning is
wanted.
NB: The encoded limits must exceed the limits encoded. If a warning is
required when an axle stops (0 RPM) then set the minimum limit to 1
DATE - CLOCK:
Set the date and time in this menu:
HOURS - MINUTES - YEAR - MONTH - DAY.
To Next Page
Loading...