TEEJET 5000 OPERATORS MANUAL SLURRY SPREADER, OTHER TYPE (HYDR.)
7.17
SLURRY SPREADER (HYDRAULIC CONTROL)
Select slurry spreader from the main menu
as follows:
1. Using the arrow keys move the cursor
over “SLURRY SPREADER”. Press
“SELECT”.
2. Main menu
– select slurry spreader
3. Accept the selected type or choose
another type.
4. Select type
5. It is now possible to choose between
the displayed types.
6. Select the slurry spreader type.
7. Accept
The following is displayed:
It is now possible to choose between the
displayed functions:
Each function will be described one by one
in the following sections.
The task function is described in section 2
along with all of the other functions that are
available in all sections.
To Next Page
Loading...