TEEJET 5000 OPERATORS MANUAL FERTILISER DISTRIBUTOR, RAUCH AERO
4.95
+: Each press of this key increases the speed of the feed rollers by 1
RPM. If the key is held down then the speed of the feed rollers will
increase at a suitable speed. The present application rate can be
seen at the same time by pressing “KG/HA”.
-: Each press of this key decreases the speed of the feed rollers by 1
RPM. If the key is held down then the speed of the feed rollers will
decrease at a suitable speed. The present application rate can be
seen at the same time by pressing “KG/HA”.
KG/HA: The present application rate, calculated from the forward speed,
working width plus the present speed of the feed rollers.
FERTILISER DISTRIBUTOR ENCODE
This menu allows the operator to encode the various settings that are necessary
for spreading. Each implement has it’s own set of encodements. Encodements
such as speed sensor (and its calibration) have their own values under each
implement.
Always check these encodements in the status screen each time you change
implements.
To Next Page
Loading...