TEEJET 5000 OPERATORS MANUAL SEED DRILL, SIMBA
5.73
METRE SWITCH
Select whether the metre counter is started/stopped manually “MANUAL” or by
the selected implement sensor “IMPLEM. SENSOR”.
WORK HOUR ON/OFF
Select whether the timer function is started/stopped manually via the function key
in the operation menu or by the selected implement sensor.
REVS. SENSOR
Encode the number of pulses the sensors fitted to the drill shaft give per
revolution. It is also possible to select between clutch monitoring and RPM
monitoring (monitoring fan speed on pneumatic machines).
PTO SENSOR
Encode 1 if the TeeJet PTO sensor kit (932-983) is
used.
DRILL SHAFT SENSOR
Encode the number of pulses the sensor fitted to the
drill shaft gives per revolution (sensors that generate
fewer than 4 pulses per revolution cannot be used).
FAN SENSOR
Encode the number of impulses the sensor gives per
revolution.
To Next Page
Loading...