FERTILISER DISTRIBUTOR, BREDAL K RAMP TEEJET 5000 OPERATORS MANUAL
4.86
DISTRIBUTOR WIDTH:
The effective spreading width of the spreader.
Method:
1. Press the “DISTRIB. WIDTH” key and the picture
to the left is displayed.
2. Encode the effective spreading width in
centimetres using the numerical keypad.
STEP %:
Encode the size of the steps for the “STEP” function. This % value is the same for
both + and -. The maximum step size is 99%.
FORWARD SPEED SENSOR
A speed sensor is fitted to the spreader, this sensor gives the correct number of
pulses for controlling the application rate, and this sensor should be selected.
WHEEL TRACTOR AND RADAR
If forward speed measurement is not required from the sensor mounted on the
spreader, WHEEL TRACTOR or RADAR can be selected.
Please refer to chapter 2 for speed sensor calibration
METRE SWITCH:
Select whether the metre counter is started/stopped manually “MANUAL” or by
the selected implement sensor “IMPLEM. SENSOR”.
To Next Page
Loading...