TEEJET 5000 OPERATORS MANUAL FERTILISER DISTRIBUTOR, BREDAL HYDR. B
4.53
FERTILISER SPREADER ENCODE
This menu allows the operator to encode the various settings that are necessary
for spreading. Each implement has it’s own set of encodements. Encodements
such as speed sensor (and its calibration) have their own values under each
implement.
Always check these encodements in the status screen each time you change
implements.
DOSE RATE:
The effective working width of the spreader must be
encoded under “DISTRIB: WIDTH” before DOSE
RATE is selected.
To Next Page
Loading...