SEED DRILL, LEMKEN TEEJET 5000 OPERATORS MANUAL
5.38
METHOD B
This method is the most traditional and the most used method. Tramlines are
made when the bout number is the same as the track number.
Example of method B Even:
The tramline cannot be split
over 2 bouts in this example
with a rhythm of 4 encoded.
The first bout can only be
sown with one half of the drill
open. Once this is done the
tramlines can be made with
either 2x2 solenoid shutters or
2 clutches fitted to the middle
of the drill.
NB!
Tramlines are made when the
present bout number is the
same as the encoded rhythm
(track number).
Note where, in the first 4 bouts
around the whole field, the
bouts should be counted (A)
and where bouts should not
be counted (all other corners).
Bout counting can be
controlled by using either the
“HOLD” key or by using the
“TRACK +/-“ keys.
To Next Page
Loading...