FERTILISER DISTRIBUTOR, BREDAL HYDR. K TEEJET 5000 OPERATORS MANUAL
4.70
AUTO/MAN
Select “MAN” if the spreader is to be emptied at a standstill or at very low speeds.
For normal operation select “AUTO”.
”AUTO” is selected as the norm as this is applicable for most purposes.
Manual operation
The rate in kg/min. must be encoded when “MAN” has
been selected:
Encode the required kg/min. using the numerical
keypad.
Pressing “CALC: CALIB.” Calculates the correct
settings for the spreader.
DISTRIBUTOR WIDTH:
The effective spreading width of the spreader.
Method:
1. Press the “DISTRIB. WIDTH” key and the picture to
the left is displayed.
2. Encode the effective spreading width in centimetres
using the numerical keypad.
To Next Page
Loading...