TEEJET 5000 OPERATORS MANUAL FERTILISER DISTRIBUTOR, BØGBALLE
4.31
KG/LEFT:
The amount filled into the spreader must be encoded here; to be able to see how
much fertiliser is left in the hopper.
NOTE: If there is some fertiliser left in the hopper before refilling, then this
amount must be added to the amount filled thus:
Amount left in hopper + filled amount = Kg. left.
HA LEFT
Encode the size of the field to be spread here. END TIME, is calculated from this
encodement.
DISTRIBUTOR WIDTH
The effective spreading width of the spreader.
Method:
1. Press the “DISTRIB. WIDTH” key and the picture
to the left is displayed.
2. Encode the effective spreading width using the
numerical keypad.
STEP %:
Encode the size of the steps for the “STEP” function. This % value is the same for
both + and -. The maximum step size is 99%.
To Next Page
Loading...