GENERAL FUNCTIONS TEEJET 5000 OPERATORS MANUAL
2.34
GENERAL WARNINGS:
The TeeJet 5000 has the following general warnings:
1. WARN. BATT: Displayed when the power supply to the TeeJet 5000 falls to
10V, This warning disappears when the power supply reaches 10V again.
2. WARN. OUTPUT: Displayed when there is a short circuit on a controlling
device, i.e. clutches, motor, etc. This warning disappears when there is no
longer a short circuit.
3. WARN. DATA ERROR: Displayed when a fault occurs in encodements and
counters. This warning can be removed by pressing the RETURN key. Check
all encodements, if the problem persists please contact your local dealer.
4. WARN. ACTUATOR ERROR: Displayed when a problem occurs with an
actuator on a fertiliser spreader.
Check the wiring, if the problem persists, please contact your local dealer.
To Next Page
Loading...