TeeJet 5000 - Introduction

FERTILISER DISTRIBUTOR, BREDAL K RAMP TEEJET 5000 OPERATORS MANUAL
4.76
INTRODUCTION
TeeJet 5000 used to control the BREDAL K lime spreader with auger.
- Maintain the correct application rate regardless of forward speed, plus the ability
to alter the application rate in steps depending on the crop’s requirement.
- The TeeJet 5000 controls the application rate using a proportional valve that
adjusts the amount of oil to a hydraulic pump, which in turn alters the belt and
auger speed.
- Visible and audible warnings given for incorrect rates, forward speed, PTO, KG
left, etc.
NOTE: The computer must be calibrated with the spreader to ensure correct
operation.
This calibration must take place the first time the computer is connected to the
spreader and each time the computer is connected to another spreader.