GENERAL FUNCTIONS TEEJET 5000 OPERATORS MANUAL
2.4
TRACTOR FUNCTIONS
SLIP = Wheel slip
PTO = Revolutions from the PTO
METRE = Distance travelled
BATT = Battery voltage
SLIP: Wheelslip in per cent. The relation between speed measured on a
wheel or an axle and speed measured by radar. This function is
active only if a radar is mounted and "ON" is encoded.
PTO: Revolutions per minute on the PTO. This function is active only if a
PTO sensor has been mounted.
METRE: Travelled distance measured in metres and based on chosen
speed sensor. Is started and stopped by the implement sensor or
manually by pressing "METRE". (Chosen under encode).
BATT: Battery voltage supply for the computer.
AREA FUNCTIONS
HA/H = Travelling efficiency
HA = Area
HA LEFT = Remaining area
HA/H: Travelling efficiency. The size of the area worked at the present
speed and with the present implement (working width).
HA: Area counter. Worked area in hectares since zeroing.
NB! A total counter for the area is found in "DATA/DELETE".
HA LEFT: Remaining area. Of the size of the field is encoded before start (in
"ENCODE") the remaining area can be read here.
TIME FUNCTIONS
TIMER: Working time in hours and minutes
END TIME: The time when the work will be finished.
CLOCK: Time in hours:minutes:seconds
DATE: Day:month:year
To Next Page
Loading...